Baumit SilikatTop can be applied onto many surface types if Baumit UniPrimer has been applied first. It is suitable for external wall insulation with appropriate preparation, cement and lime render,Well bonded mineral, silicate paints and coatings, Gypsum plasterboards (pretreated with 2 coats of Baumit SperrGrund) Baumit SilikatTop is:
A topcoat render application providing decoration and protection to facades.
For application over old and new mineral coatings, renovation render basecoats, concrete surfaces and mineral basecoats in the Baumit EWI Systems.
Also suitable in conservation and renovation work.
Typical use of Baumit SilikatTop:
Surfaces must always be prepared with a full and even coat of Baumit UniPrimer before applying Baumit SilikatTop. Allow to dry for 24 hours. Mixing: Baumit SilikatTop must be well and slowly mixed with an electric hand mixer before application. It may not be mixed with other paint materials. Where required a minimal amount of water (max. 1%) may be added to improve workability. Application: The SilikatTop is applied with a stainless steel trowel or a fine spray machine and trowelled through to the grain thickness to produce a full and even coat. The surface is then textured using a plastic float, moving in tight circular motions. It should be applied systematically and continuously in complete sections. Available to be tinted in various colours, please call for more information.
£104.98 inc VAT
£91.98 inc VAT
£81.60 inc VAT
£68.68 inc VAT
£68.68 inc VAT