THERE MAY BE A DELAY ON SOME BAUMIT PRODUCTS DUE TO SHORAGE ON RAW MATERIALS
Baumit StarContact product features include:
- Strong adhesive properties.
- Flexible and crack resistant.
- Dual purpose adhesive or basecoat for insulation boards.
- Factory mixed requiring minimal preparation.
- Applicable to many prepared surfaces.
Typical use of Baumit StarContact
Baumit StarContact is a multipurpose basecoat and contact adhesive ideal for insulation boards. Surfaces should be clean, dry and protected from extreme weather during application. Product should be allowed to dry for at least 24 hours before adding any fixings to adhered insulation boards or allowed to cure for up to 3 days before further coating.
Baumit StarContact should be added to a container of clean water and mixed until it is a smooth, creamy consistency. Leave to stand for five minutes before final mixing. Apply immediately as optimum working time is 90 minutes. Coverage is approximately 4.5-5.5kg/m2 when used as an adhesive and 4-5kg/m2 when used as basecoat.