WEBERSIL TF 1.5- WINTER WHITE 15KG. (Available to be tinted in various colours, please call for more information.)

<strong>WEBERSIL TF - WINTER WHITE 15KG</strong> WEBERSIL TF - WINTER WHITE 15KG is a Silicone-based, through-coloured, decorative finish. It is highly weather resistant and creates a vapour permeable surface. Available to be tinted in various colours, please call for more information. <strong>webersil TF</strong> has an even textured finish. <div id="c5503" class="box"> <h3 class="csc-firstHeader">FEATURES AND BENEFITS</h3> <ul> <li>Highly water repellent, providing optimum facade protection</li> <li>Highly vapour permeable</li> <li>Available in a wide range of colours</li> <li>Weather resistant and UV stable</li> <li>Low susceptibility to soiling</li> <li>Technical support from a Quality Assured company</li> <li>Forms part of a number of BBA approved insulation systems.</li> </ul> </div> <div id="c5506" class="box"><strong>Webersil TF</strong> is available in a wide range of colours. Please call for more colour options on 01637 210033.</div> <div> <h3 class="csc-firstHeader">COVERAGE / YIELD</h3> <table class="contenttable contenttable-0" style="height: 91px" width="440"> <tbody> <tr class="tr-even tr-0"> <td class="td-0"></td> <td class="td-last td-1">Coverage</td> </tr> <tr class="tr-odd tr-1"> <td class="td-0">weber PR310</td> <td class="td-last td-1">0.25 litres/m2</td> </tr> <tr class="tr-even tr-last"> <td class="td-0">webersil TF</td> <td class="td-last td-1">2.7 kg/m2</td> </tr> </tbody> </table> </div> <div> <h3 class="csc-firstHeader">APPLICATION</h3> <strong>webersil TF</strong> is a wet premixed material. It is applied to prepared surfaces on to a tinted primer. Prime the prepared surface using tinted <strong>weber PR310</strong> applied by brush or spray. <strong>weber PR310</strong> is of low viscosity and easily applied. Check batch numbers and colours of material required to complete working area. Stir well in buckets and if required, make minor adjustments to workability with a little water, thoroughly mixed in. Apply <strong>webersil TF</strong> with a steel float and hawk to work area. Use a thin plastic float to finish <strong>webersil TF</strong>. Evenness of cover and texture are of paramount importance. Dry weather may not be enough if the humidity is high and the drying potential of the atmosphere is low. A dry atmosphere which can be foreseen for about 36 hours is preferred to effect initial curing and prevent wash-off. <strong>Good practice</strong> Do not apply: <ul> <li>In damp/wet conditions</li> <li>In temperatures below 5 degrees or above 30 degrees</li> <li>On elevations in direct sunlight or where the substrate is hot</li> </ul> </div> <h3 class="csc-firstHeader">STORAGE AND SHELF LIFE</h3> Wet pre-mixed materials must be stored frost-free and protected from direct sunlight and extreme heat. To prevent ingress of air, buckets should be stacked no more than 2 high, and where a central support is used, to a maximum height of 4. When stored under these conditions, the shelf life of the product is 12 months from the date of manufacture. <a href="https://www.netweber.co.uk/uploads/tx_weberproductpage/07.410_weber.sil_TF_01.pdf">CLICK HERE FOR DATA SHEET</a>