WEBERSIL TF - WINTER WHITE 15KG
WEBERSIL TF - WINTER WHITE 15KG is a Silicone-based, through-coloured, decorative finish. It is highly weather resistant and creates a vapour permeable surface.
webersil TF has an even textured finish.
- Highly water repellent, providing optimum facade protection
- Highly vapour permeable
- Available in a wide range of colours
- Weather resistant and UV stable
- Low susceptibility to soiling
- Technical support from a Quality Assured company
- Forms part of a number of BBA approved insulation systems.
Webersil TF is available in a wide range of colours. Please call for more colour options on 01637 210033.
is a wet premixed material. It is applied to prepared surfaces on to a tinted primer.
Prime the prepared surface using tinted weber PR310
applied by brush or spray.
is of low viscosity and easily applied.
Check batch numbers and colours of material required to complete working area.
Stir well in buckets and if required, make minor adjustments to workability with a little water, thoroughly mixed in.
Apply webersil TF
with a steel float and hawk to work area. Use a thin plastic float to finish webersil TF
. Evenness of cover and texture are of paramount importance.
Dry weather may not be enough if the humidity is high and the drying potential of the atmosphere is low.
A dry atmosphere which can be foreseen for about 36 hours is preferred to effect initial curing and prevent wash-off.
Do not apply:
- In damp/wet conditions
- In temperatures below 5 degrees or above 30 degrees
- On elevations in direct sunlight or where the substrate is hot
Wet pre-mixed materials must be stored frost-free and protected from direct sunlight and extreme heat.
To prevent ingress of air, buckets should be stacked no more than 2 high, and where a central support is used, to a maximum height of 4.
When stored under these conditions, the shelf life of the product is 12 months from the date of manufacture.
CLICK HERE FOR DATA SHEET